Arched metal detector with integrated radiation monitoring system B2scan SD1000-RC-09

Область применения:

предназначен для точного обнаружения металлических, радиоактивных и делящихся предметов и материалов на теле и одежде человека.

Metal detector dimensions:

  • • Total net weight: 72 kg
  • • External dimensions:
  • 2220 mm (h) x 880 mm (w) x 500 mm (g)
  • • Inner dimensions:
  • 2000 mm (h) x 760 mm (w) x 500 mm (g)
  • • Operating temperature: 0 ° C to + 55 ° C
Download file

METAL DETECTOR CHARACTERISTICS

  • LED indication of detected items on the display of the control unit and side panels.
  • Adjustable number of detection zones – 6, 12 or 18 zones.
  • Sound and light alarm: adjustment of the length, volume and tone of the alarm.
  • Advanced broadband detection technology provides the required selectivity, allows you to work in the detection modes of mixed, ferrous or non-ferrous metals.
  • Automatic interference compensation.
  • Two-level protection against unauthorized access:
  • The SOFTWARE is password protected, the control unit is locked with a key.
  • Multi-level independent sensitivity adjustment. Ability to determine the clip at the maximum level of sensitivity.
  • 72 pre-installed selective detection programs, the ability to create your own programs
  • Passage width: 760 mm, optional up to 1000 mm.
  • The minimum distance between detectors: 0.3 meters without the sync cable.
  • Ability to connect power and Ethernet cables, left, right and top of the metal detector.
  • Stop/go Indicators on the front panel of the metal detector.
  • “Dry contacts” for connecting third-party equipment (turnstile, gateway, camera, etc.))
  • 4 modes of operation of intelligent counters of passenger traffic and alarms
  • “Anti-throw” mode
  • Built-in uninterruptible power supply for 20 hours of battery life: optional
  • Event logger on SD card: optional.
  • Computer control module: the ability to connect to a computer via USB, Ethernet, Bluetooth
  • Mobile application to control the metal detector from a smartphone or tablet
  • Transmission of data over a local network using TCP / IP protocols
  • Information exchange with the system for collecting results of technical monitoring and control using a unified data transfer protocol and metadata format developed on XML basis.
  • Mains voltage: AC100V ~ 242V, 50/60 Hz
  • Signal frequency 7000-8999 Hz (adjustable)
  • Power consumption: <20 W

Characteristics of the radiation monitoring module КРП-09

  • Led indication of radioactive material detection on the control unit display.
  • The energy of gamma radiation recorded by the Device is from 0.05 to 3.0 MeV.
  • Detection thresholds comply with the requirements of Government Decree No. 969 of September 26, 2016.
  • The frequency of false activation – no more than 10-5 (0.001%).
  • Continuous operation – 24 hours a day, 7 days a week.
  • The change in sensitivity with a change in temperature within the operating conditions of use is no more than ± 2%.
  • Sensitivity change when changing the power supply voltage within the operating conditions of use is not more than ±2%.
  • The device provides automatic classification of alarms according to the degree of danger (at least three degrees)
  • The controlled space of the device is a sphere with a radius of 2m centered on the location of the radio monitor and complies with the requirements of the Government of the Russian Federation No. 969 of September 26, 2016.

The equipment has passed compulsory and voluntary certification applicable on the Russian Federation territory. Technical parameters and complete set of goods are subject to change without notice.

Send request